Here are just a few initial notes on setup of our Synology DS410.

Drives: Installing easy, one drive lower than fans, notice it runs a littel hotter too. To install the lowest of the 4 trays, you need to remove the back fans, but no biggie. The sleds are nice and simple. The kit comes with little baggies of screws so that is great. Also, the drive sleds slide right in and the SATA connector is aligned perfectly so you can just nudge the drives into place without any stress on the drive or sled. I went with some Western Digital 2TB Green drives. I have never had great luck with WD, but the power consumption on these newer drives seemed like a good call and the price point was great.

Operation: It is just amazingly quiet! Geez, you put in 4 2TB drives and you expect the thing to be noisy, but it is super quiet. This is a huge benefit for me as I hate the electronics sounds around the house, so this is great even though it will be the garage. I have a Nextstar simple RAID-1 with a couple of SATA drives and it is super loud in comparison.

Building the RAID: RAID-5 took forever due to size of the logical volume. I could have gone with the fast/rapid option, but anyone who has ever been burned by a bad RAID setup because they did the quick format only to have to do a full low-level format later knows why I went this route right off the bat.

Little Things: There are many things to appreciate throughout their setup process I wanted to note. After setting up a ton of different network devices, we all know changing network address is a pain because the device can get confused during the process and if the configuration is web-based, it can get messy when you lose contact with the old address.  I was waiting for that to happen when I went from DHCP to fixed IP through the web GUI, but to my surprise it redirected to the new IP address (nice!). I am so used to HP, Cisco, Linksys and other that don’t care to take this into account and force the admin to enter the new URL / IP address but when it is done right, it is so nice to see. Nice GUI touches throughout. They use AJAXy stuff, but not overdoing it. Linux support in documentation. Date and time already correct due to network time.

Initial Setup: The box came with CD with a Mac, Windows or Linux installer. I am really happy that Synology has Linux ‘baked-in’ to everything they do with their products and I really want to support that.  My DS410 came with DS v 2.2, so had to upgrade to latest 2.3. I downloaded the updated firmware (v2.3) and in the expansion process, Archive utility expanded a little too much so it didn’t keep the .pat file in-place for the GUI to recognize that the update was a legit firmware update. But, in going to their support site and FAQ, they had an article for that and I had change archive utility to not expand more.

Support Site: As mentioned above, their support website rocked. The FAQ area was great and exactly what I needed. They have this down.

Testing: after initial setup, I went to move the DS410 and the power cable was loose causing the DS410 to lose power. Plugged it back in and all was well! Copied some files across the network and the drives and throughput felt great. I also turned-on the various applications and have been testing with a great success on the internal network, from work and from remote on my iPhone using the Synology iPhone Apps. Being able to consolidate music and stream anywhere will be awesome the more I consolidate it on the Diskstation.

Very happy camper right now…